FESTO en Euskoskills - NINTH WEEK

XABI

Hello my dear readers, this week we have begun to work on a new challenge. This challenge is called FESTO at Euskoskills, and from what we have seen this week, it has little manual assembly and many hours of programming on the computer.

Image1

In this first week we have been using the program Sysmac Studio (OMRON) and we are doing the "File 1" where we had to understand to program in ST language and have to pass it from ST to diagram of relays language. On the left side of Image1 we can see part of the program programmed in ST language and on the other side we can see the language of relees diagram.


We have also had to create a screen (Image2) through the same program where you can visualize the bottle labeling process and be able to edit some information.

Image2

GAIZKA

This week we have started with a new challenge, challenge 3. In this challenge we will work with OMRON. We will start with the card 1, in this file we will have to configure the PLC and make the connection with the screen, make an operation page, another data record page, another page of recipes, another page of alarms and finally a page of roles and security.We have plenty of time to finish this, almost a week and a half, although this challenge is quite short, and I hope we'll be good with time.

LANDER

We just started the 3rd challenge. This challenge is divided in 2 parts and  we started with the first onw, that involves to start using and learning the OMRON software, called Sysnac Studio. First of all we started learning the 2 ways of programming, strucured text and rele diagrams, probably the easiest part.

After that we continued adding a HMI screen, to have a way to see all the programs operations and data in a proper and pretty way. For that we created all the design from the start. As the last step of the challenge first part we connected 2 PLCs and a physical screen and we tested de program.